Extras - pankajsteel.com

Enter proper values in form below, to get an approximate Weight for your Steel requirement.

Steel Weight Calculator
Alloy
Shape
Number of Pieces



Metal Weight	Kgs.

Angles (Equal Sides)
Designation	Sides in	Thickness mm				Weight in kg per metre
ISA	mm	3	4	5	6	8	10	12	16	20	mm
2020	20 x 20mm	0.9	1.1								kg/m
2525	25 x 25mm	1.1	1.4	1.8							kg/m
3030	30 x 30mm	1.4	1.8	2.2							kg/m
3535	35 x 35mm	1.6	2.1	2.6	3.0						kg/m
4040	40 x 40mm	1.8	2.4	3.0	3.5						kg/m
4545	45 x 45mm	2.1	2.7	3.4	4.0						kg/m
5050	50 x 50mm	2.3	3.0	3.8	4.5						kg/m
6565	65 x 65mm			4.9	5.8	7.7	9.4				kg/m
7575	75 x 75mm			5.7	6.8	8.9	11.0				kg/m
8080	80 x 80mm				7.3	9.6	11.8	14.0			kg/m
9090	90 x 90mm				8.2	10.8	13.4	15.8			kg/m
100100	100 x 100mm				9.2	12.1	14.9	17.7			kg/m
110110	110 x 110mm					13.4	16.5	19.6			kg/m
130130	130 x 130mm					15.9	19.7	23.4			kg/m
150150	150 x 150mm						22.8	27.2	35.8	44.1	kg/m
200200	200 x 200mm							36.6	48.5	60.0	kg/m

Channels
Size(mm)	Weight(kg/m)
75 x 40	7.14
100 x 50	9.56
125 x 65	13.1
150 x 75	16.6
175 x 75	19.6
200 x 75	22.3
250 x 82	34.2
300 x 90	36.3
400 x 100	50.1
41 x 32 (Telechannel)	5.05

Beams
Size(mm)	Weight(kg/m)
116 x 100	23.0
125 x 70	13.4
150 x 75	15.0
175 x 85	19.5
200 x 100	25.4
250 x 125	37.3
300 x 140	46.1
350 x 140	52.4
400 x 140	61.6
450 x 150	72.4
500 x 180	86.9
600 x 210	123.0
INP-14 (140 x 66)	14.3
INP-16 (160 x 74)	14.3
INP-18 (180 x 82)	21.9
INP-20 (200 x 90)	28.2

Glossary Of Terms Relating to Iron & Steel
Steel Making, Mild Steel, Tools & Alloy steel, Bright Bar & Steel Wire

Alloy Steel - A steel containing one or more alloying elements as a result of which it develops specific characteristics.

Bar - Finished product of solid section which may be rectangular, squares, round or half-round or polygonal.

Bright Bar or Wire - Bar or wire with a bright finish obtained by cold drawing, machining, grinding, etc.

Extra Deep Drawing Steel - A superior quality low carbon deep drawing steel.

Free Cutting Steel - Steel in which special addition of such elements as sulphur, lead, etc., are made to enhance machinability.

High Speed Steel - A special variety of tools steel which, by virtue of its composition, retains its cutting hardness at a low red heat.

HR Coil - A hot-rolled flat product supplied in coil form.

Pickling - The removal of scale by chemical or electrochemical treatment with diluted acids or other chemicals followed by washing.

Skelp - Skelp is strip.

DSP : Bars, Rods & Rebars

Rationalised sizes of Bars, Rods & Rebars

Plain Rounds SAIL TMT/ SAIL TMT HCR/ TOR Bars Mill

Size mm Weight
kg/m Size mm Weight kg/m Length
m

      16 1.58 5.5 to 13
for all sizes DMM

18 2.00 18 2.00 DMM

20 2.47 20 2.47 DMM

22 2.98 22 2.99 DMM

25 3.85 25 3.86 DMM

28 4.83 28 4.83 DMM

DMM - Durgapur Merchant Mill

Common Grades:
IS 2062/ 1999, IS 1786/ 1985, SAIL TMT and SAIL TMT HCR. Also available in the following foreign specifications: ASTM-A 615 Grade 40 (for TMT wire rods) and ASTM-A 615 Grade 40/ Grade 60 (for TMT Bars), if sufficient orders are available.

Tolerance as per IS 1786 or equivalent.
Packaging: Signode strapping in bundles of 5 tonnes.
Rounds are available in straight lengths. Plain Rounds/ TMT bars/ TMT-HCR rebars in sizes 8 and 10 mm are available in coils. The other sizes of Plain Rounds/ TMT bars/ TMT-HCR rebars are available in straight lengths.

High Temperature Strength
SAIL TMT-HCR reinforcement bars exhibit higher thermal resistance even at temperatures up to 600 0 C. The retention of significant strength or, in other words, resistance to softening, is attributed to design of steel chemistry, presence of tempered martensite layer on the rebar surface and absence of any cold worked structural zone. Thus the thermally hardened SAIL TMT-HCR rebars are ideal for use in places prone to fire hazards.

Applications

Specification Application Special Qualities

SAIL TMT General concrete reinforcements in high rise buildings, bridges and other concrete structures Excellent bendability, good weldability and high fatigue resistance on dynamic loading

SAIL TMT HCR Construction exposed to coastal, marine or underground environment In addition to above this has high corrosion resistance properties

Savings in Steel* when using SAIL TMT or SAIL TMT-HCR

Grade Fe 415 Fe 500 Fe 550

Saving in steel compared to IS-2062 plain bar 40% 44% 47%

Saving in steel compared to IS-1786/ Fe 415 CTD    14% 19%

* In case of doubly reinforced beams using M15 and M20 grades of cement

Weight of Tata make square
hollow section generally available.
Other sizes also available upon
request.

SIZE Wt/mtrs

25 X 25 X 2.00MM 1.47

25 X 25 X 2.60MM 1.69

25 X 25 X 3.20MM 1.98

32 X 32 X 2.60MM 2.44

32 X 32 X 3.20MM 2.96

38 X 38 X 2.6MM 2.73

38 X 38 X 3.2MM 3.27

40 X 38 X 4.0MM 3.95

40 X 40 X2.6MM 3.10

40 X 40 X 3.2MM 3.76

45 X 45 X 2.6MM 3.51

45 X 45 X 3.2MM 4.27

49.05 X 49.05 X 2.9MM 4.07

49.05 X 49.05 X 3.6MM 4.93

49.05 X 49.05 X 4.5MM 5.95

60 X 60 X 2.9MM 5.24

60 X 60 X 3.2MM 5.75

72 X 72 X 3.2MM 6.70

72 X 72 X 4.0MM 8.22

72 X 72 X 4.8MM 9.66

91.50 X 91.50 X 3.6MM 9.67

91.50 X 91.50 X 4.5MM 11.88

91.50 X 91.50 X 5.4MM 14.01

113.50 X 1133.50 X 4.8MM 15.92

113.50 X 1133.50 X 5.4MM 17.74

132.00 X D132.00 X 4.8MM 18.71

132.00 X D132.00 X 5.4MM 20.88

180.00 X 180.00 X 5.00MM 27.57

180.00 X 180.00 X 6.00MM 32.94

50 X 25 X 2.65MM 2.73

50 X 25 X 3.20MM 3.27

66.00 X 33.00 X 2.90MM 4.07

66.00 X 33.00 X 3.60MM 4.93

66.00 X 33.00 X 4.50MM 5.95

60.00 X 40.00 X 2.6MM 3.90

60.00 X 40.00 X 2.9MM 4.35

80.00 X 40.00 X 2.00MM 3.66

80.00 X 40.00 X 3.20MM 5.75

96.00 X 48.00 X 3.2MM 6.70

96.00 X 48.00 X 4.0MM 8.22

96.00 X 48.00 X 4.8MM 9.66

122.00 X 61.00 X 3.6MM 9.67

122.00 X 61.00 X 4.5MM 11.88

122.00 X 61.00 X 5.4MM 14.01

145.00 X 82.00 X 4.50MM 15.92

145.00 X 82.00 X 5.40MM 17.74

172.00 X 92.00 X 4.80MM 18.71

172.00 X 92.00 X 5.40MM 20.88

Dimension And Nominal Mass Of Steel Tubes Conforming to IS : 1239 (PART-1) 1990
		Outside Diameter			Mass Of Tube Black And Galvanized
Nominal Bore (mm)	Class or category	Min (mm)	Max(mm)	Thickness (mm)	Plain end kgs/mtrs*	Screwed& Socketed kgs/mtr*	Plain end mtrs/ton*	Screwed& socketed mtrs/ton*

15 NB	L	21.4	21.0	2.0	0.956	0.956	1056	1046
	M	21.8	21.0	2.6	1.21	1.22	826	820
	H	21.8	21.0	3.2	1.44	1.45	694	690

20 NB	L	26.9	26.4	2.3	1.38	1.39	725	719
	M	27.3	26.5	2.6	1.56	1.57	641	637
	H	27.3	26.5	3.2	1.87	1.88	535	532

25 NB	L	33.8	33.2	2.6	1.98	2.00	505	500
	M	34.2	33.3	3.2	2.41	2.43	415	412
	H	34.2	33.3	4.0	2.93	2.95	341	339

32 NB	L	42.5	41.9	2.6	2.54	2.57	394	389
	M	42.9	42.0	4.0	3.79	3.81	323	319
	H	42.9	42.0	4.0	3.79	3.82	204	202

40 NB	L	48.4	47.8	2.9	3.23	3.27	310	306
	M	48.8	47.9	3.2	3.56	3.60	281	278
	H	48.8	47.9	4.0	4.37	4.41	229	227

50 NB	L	60.2	59.6	2.9	4.08	4.15	245	241
	M	60.8	59.7	3.6	5.03	5.10	199	196
	H	60.8	59.7	4.5	6.19	6.26	162	160

65 NB	L	76.0	75.2	3.2	5.71	5.83	175	172
	M	76.6	75.3	3.6	6.42	6.54	156	153
	H	76.6	75.3	4.5	7.93	8.05	120	124

80 NB	L	88.7	87.9	3.2	6.72	6.89	149	145
	M	89.5	88.0	4.0	8.36	8.53	120	117
	H	89.5	88.0	4.8	9.90	10.10	101	96

100 NB	L	113.9	113.0	3.0	9.75	10.00	103	100
	M	115.0	113.1	4.5	12.20	12.50	82	80
	H	115.0	113.1	5.4	15.40	14.80	69	68

125 NB	M	140.8	138.5	4.8	15.90	16.40	63	61
125 NB	H	140.8	138.5	5.4	17.90	18.40	56	54

150 NB	M	166.5	163.9	4.8	18.90	19.50	53	51
150 NB	H	166.5	163.9	5.4	21.30	21.90	47	46

*APPROXIMATE Figures only.
Actual weight could vary higher dimension weight can be given on request